Packaging Machinery: High-Friction Rubber Rollers for High-Speed Film Handling
Problem Statement
High-speed film handling rollers require consistent friction coefficients (>1.2) and minimal wear under continuous operation (100+ cycles/min). Standard NBR compounds degrade due to heat buildup (>120°C) and plasticizer migration, leading to surface glazing and film slippage.
Material Science Analysis
NBR fails due to its low thermal stability and polar nitrile groups attracting plasticizers. RubberQ’s HNBR compound crosslinks with peroxide curing, eliminating plasticizers. The hydrogenated backbone resists oxidative degradation at 150°C. Carboxylated HNBR (XHNBR) further enhances abrasion resistance via ionic crosslinks.
Technical Specifications
- Shore A Hardness: 70±5 (ASTM D2240)
- Tensile Strength: 22 MPa (ASTM D412)
- Elongation at Break: 350%
- Temperature Range: -40°C to +150°C (continuous)
- Compression Set (22h @ 150°C): 18% (ASTM D395)
- Chemical Resistance: Resists oils, ethylene glycol, and weak acids (ASTM D471)
Material Comparison
| Parameter | XHNBR (RubberQ-7702) | Standard NBR | Polyurethane |
|---|---|---|---|
| Friction Coefficient (vs PET film) | 1.25 | 0.9 | 1.4 |
| Abrasion Loss (mm³, DIN 53516) | 40 | 120 | 30 |
| Max Operational Speed | 150 m/min | 80 m/min | 200 m/min |
| Service Life (cycles) | 2.5M | 0.8M | 3M |
| Cost Index | 1.8 | 1.0 | 2.5 |
Standard Compliance
RubberQ’s IATF 16949-certified production ensures:
- Batch-to-batch viscosity control (±5 Mooney units, ASTM D1646)
- Dimensional tolerances of ±0.15mm on roller diameters (ISO 3601-1)
- 100% adhesion testing for metal-bonded cores (ASTM D429 Method B)
For custom material compound development or IATF 16949 documentation, consult RubberQ’s engineering department.
Subscribe to Technical Updates
Receive new material insights and engineering case notes directly by email.
Related Articles
Apr 05, 2026
Liquid Silicone Rubber (LSR) Tooling: Why Initial Investment Pays Off in Precision.
Liquid Silicone Rubber (LSR) Tooling: Why Initial Investment Pays Off in Precision Problem Statement High-cycle manufacturing of precision components, such as EV battery seals and AI server gaskets, demands materials with exceptional dimensional stability and chemical resistance. Traditional elastomers like EPDM and NBR often fail under extreme thermal cycling and aggressive chemical exposure, leading to […]
Read articleApr 05, 2026
High-Tonnage Vulcanization: Managing Large-Scale Industrial Rubber Components.
High-Tonnage Vulcanization: Managing Large-Scale Industrial Rubber Components Problem Statement Large-scale industrial rubber components, such as conveyor belts and hydraulic seals, face premature failure under high-tonnage vulcanization. Common issues include chemical degradation at temperatures exceeding 200°C and compression set failure during high-pressure cycles. Material Science Analysis Standard EPDM polymers fail under extreme heat due to their […]
Read articleApr 05, 2026
Commercial Aircraft Interiors: Meeting Smoke and Toxicity Standards (FST).
Commercial Aircraft Interiors: Meeting Smoke and Toxicity Standards (FST) Problem Statement Polymer components in aircraft interiors must pass FAR 25.853 flammability tests while maintaining mechanical performance. Standard EPDM fails at 180°C with toxic smoke emission (HCN >100 ppm). Material Science Analysis Chloroprene rubber (CR) releases HCl gas during combustion. Fluorosilicone (FVMQ) provides superior thermal stability […]
Read articleNeed technical consultation?
Our engineering team can help apply these material insights to your specific project.
REQUEST A QUOTE