Vamac (AEM) vs. ACM: Comparing High-Temp Oil Resistance in Turbocharger Hoses.

Vamac (AEM) vs. ACM: Comparing High-Temp Oil Resistance in Turbocharger Hoses

Problem Statement

Turbocharger hoses require materials that withstand continuous exposure to high temperatures (up to 150°C) and engine oil. Traditional ACM elastomers often fail due to excessive compression set and chemical degradation, leading to premature hose failure.

Material Science Analysis

ACM elastomers rely on acrylate monomers for oil resistance but exhibit poor compression set performance above 120°C. Vamac (AEM), an ethylene-acrylate copolymer, incorporates a saturated backbone with polar acrylate groups. This structure enhances thermal stability and reduces compression set. The fluorine-free composition of Vamac also ensures compatibility with modern engine oils.

Technical Specs

• Vamac (AEM): Shore A Hardness: 70-90, Tensile Strength: 10-15 MPa, Elongation at Break: 150-300%, Temperature Range: -40°C to 175°C.
• ACM: Shore A Hardness: 60-80, Tensile Strength: 8-12 MPa, Elongation at Break: 100-250%, Temperature Range: -20°C to 150°C.

Technical Comparison

Parameter	Vamac (AEM)	ACM	Alternative: FKM
Temperature Range (°C)	-40 to 175	-20 to 150	-20 to 200
Compression Set (%)	15-25	30-50	10-20
Oil Resistance (ASTM D2000)	Excellent	Good	Excellent
Cost	Medium	Low	High

Standard Compliance

RubberQ adheres to IATF 16949 standards for batch-to-batch consistency. Our in-house compounding ensures precise control over polymer ratios, fillers, and curing agents. All materials comply with ASTM D2000 and ISO 3601 for sealing applications.

For custom material compound development or IATF 16949 documentation, consult RubberQ's engineering department.