EPDM Sulfur vs. Peroxide Cure: Comparing Heat Aging and Compression Set
Problem Statement
EPDM seals in automotive cooling systems fail under prolonged heat exposure (150°C+). Sulfur-cured EPDM shows excessive compression set (>40%) after 1,000 hours, causing leakage in radiator hose applications.
Material Science Analysis
- Sulfur-Cured EPDM: Forms polysulfide crosslinks. These bonds break under thermal stress, leading to permanent deformation. Sulfur accelerates oxidation at high temperatures.
- Peroxide-Cured EPDM: Creates stable carbon-carbon crosslinks. Resists thermal degradation due to higher bond energy (348 kJ/mol vs. 268 kJ/mol for S-S bonds). No sulfur means slower oxidation.
Technical Specs
| Parameter | Sulfur-Cured EPDM | Peroxide-Cured EPDM |
|---|---|---|
| Shore A Hardness | 70 ±5 | 70 ±3 |
| Tensile Strength (MPa) | 12.5 | 14.2 |
| Elongation at Break (%) | 350 | 320 |
| Continuous Temp. Range (°C) | -40 to +125 | -50 to +150 |
| Compression Set (22h @ 150°C, %) | 45 | 18 |
| Heat Aging (1,000h @ 150°C, ΔTensile) | -35% | -12% |
Standard Compliance
RubberQ’s IATF 16949 process controls:
- Peroxide dispersion (±0.1% tolerance)
- Cure time (±5 seconds at 180°C)
- Batch traceability via ASTM D2000 AA-703 callouts
For custom material compound development or IATF 16949 documentation, consult RubberQ’s engineering department.
技術アップデートを購読
材料知見とエンジニアリング事例をメールで受け取れます。
関連記事
2026年4月05日
Liquid Silicone Rubber (LSR) Tooling: Why Initial Investment Pays Off in Precision.
Liquid Silicone Rubber (LSR) Tooling: Why Initial Investment Pays Off in Precision Problem Statement High-cycle manufacturing of precision components, such as EV battery seals and AI server gaskets, demands materials with exceptional dimensional stability and chemical resistance. Traditional elastomers like EPDM and NBR often fail under extreme thermal cycling and aggressive chemical exposure, leading to […]
記事を読む2026年4月05日
High-Tonnage Vulcanization: Managing Large-Scale Industrial Rubber Components.
High-Tonnage Vulcanization: Managing Large-Scale Industrial Rubber Components Problem Statement Large-scale industrial rubber components, such as conveyor belts and hydraulic seals, face premature failure under high-tonnage vulcanization. Common issues include chemical degradation at temperatures exceeding 200°C and compression set failure during high-pressure cycles. Material Science Analysis Standard EPDM polymers fail under extreme heat due to their […]
記事を読む2026年4月05日
Commercial Aircraft Interiors: Meeting Smoke and Toxicity Standards (FST).
Commercial Aircraft Interiors: Meeting Smoke and Toxicity Standards (FST) Problem Statement Polymer components in aircraft interiors must pass FAR 25.853 flammability tests while maintaining mechanical performance. Standard EPDM fails at 180°C with toxic smoke emission (HCN >100 ppm). Material Science Analysis Chloroprene rubber (CR) releases HCl gas during combustion. Fluorosilicone (FVMQ) provides superior thermal stability […]
記事を読む