Over-Compression: When ‘Tighter’ is not ‘Better’ for Gasket Performance
Problem Statement
Over-compression in gaskets leads to premature failure, especially in high-pressure and high-temperature environments. Excessive compression reduces sealing efficiency, accelerates material degradation, and increases compression set.
Material Science Analysis
Over-compression stresses the polymer matrix, causing irreversible deformation. EPDM fails due to its lower crosslink density, while FKM excels due to its high fluorine content and stable carbon-fluorine bonds. HNBR offers intermediate performance with superior aging resistance.
Technical Specs
- Material: FKM (Fluorocarbon Rubber)
- Shore A Hardness: 75 ± 5
- Tensile Strength: 15 MPa
- Elongation at Break: 200%
- Temperature Range: -20°C to 200°C
- Compression Set: 15% (22 hrs @ 200°C)
Material Comparison
| Material | Shore A Hardness | Tensile Strength (MPa) | Elongation at Break (%) | Compression Set (%) | Temperature Range (°C) |
|---|---|---|---|---|---|
| FKM | 75 ± 5 | 15 | 200 | 15 | -20 to 200 |
| EPDM | 70 ± 5 | 10 | 300 | 30 | -40 to 150 |
| HNBR | 80 ± 5 | 20 | 250 | 20 | -30 to 180 |
Standard Compliance
RubberQ adheres to IATF 16949 standards for batch-to-batch consistency. Our in-house compounding ensures precise control over polymer ratios, fillers, and curing agents. ASTM D2000 material callouts and ISO 3601 sealing standards are rigorously followed.
CTA
For custom material compound development or IATF 16949 documentation, consult RubberQ’s engineering department.
技術アップデートを購読
材料知見とエンジニアリング事例をメールで受け取れます。
関連記事
2026年4月05日
Liquid Silicone Rubber (LSR) Tooling: Why Initial Investment Pays Off in Precision.
Liquid Silicone Rubber (LSR) Tooling: Why Initial Investment Pays Off in Precision Problem Statement High-cycle manufacturing of precision components, such as EV battery seals and AI server gaskets, demands materials with exceptional dimensional stability and chemical resistance. Traditional elastomers like EPDM and NBR often fail under extreme thermal cycling and aggressive chemical exposure, leading to […]
記事を読む2026年4月05日
High-Tonnage Vulcanization: Managing Large-Scale Industrial Rubber Components.
High-Tonnage Vulcanization: Managing Large-Scale Industrial Rubber Components Problem Statement Large-scale industrial rubber components, such as conveyor belts and hydraulic seals, face premature failure under high-tonnage vulcanization. Common issues include chemical degradation at temperatures exceeding 200°C and compression set failure during high-pressure cycles. Material Science Analysis Standard EPDM polymers fail under extreme heat due to their […]
記事を読む2026年4月05日
Commercial Aircraft Interiors: Meeting Smoke and Toxicity Standards (FST).
Commercial Aircraft Interiors: Meeting Smoke and Toxicity Standards (FST) Problem Statement Polymer components in aircraft interiors must pass FAR 25.853 flammability tests while maintaining mechanical performance. Standard EPDM fails at 180°C with toxic smoke emission (HCN >100 ppm). Material Science Analysis Chloroprene rubber (CR) releases HCl gas during combustion. Fluorosilicone (FVMQ) provides superior thermal stability […]
記事を読む